PVC toilet seat shifter drain tube shifter drain pipe fittings can
1. Drainage and sewage system for civil buildings
2. Civil engineering and road drainage system.
3. Industrial wastewater treatment network.
4. Agricultural irrigation and automatic irrigation pipes.
5. Marine aquaculture pipeline.
6. Swimming pool and hot spring pipeline.
1. Resist corrosion and scale, and do not affect water quality;
2. Light weight and convenient handling;
3. Convenient installation and transportation: transportation costs
can be reduced by 20-60%, and the installation hours can be saved
4. Low fluid resistance, lower than other pipes, and increased
water capacity by 30-50%;
5. Easy installation of products and flexible locking joints;
6. Save investment and reduce costs;
7. Good electrical insulation, suitable for wire, cable conduit and
construction wire piping;
8. Anti-aging is not easy to decompose, and the service life is up
to 50 years;
|Name:||Ken telescopic adjust the shifter.|
|Product category:||Pipe fittings|
|Function:||Toilet seat shift.|
|Tube thickness:||(3.0 mm)|
|Executive standard:||National standard|
|Special features:||Good elasticity|
How to install the toilet shifter?
Normally, toilet walls and drainage tube distance is emissions,
according to the standard size design due to implement variety
style very much, combined with personalized decoration, and the
outlet of the selected implement blowdown nozzle position does not
correspond, shifter is required to complete the docking at this
Shifter is a fixed size, on the market at present no corresponding
adjustment, once the top and bottom interface migration centre,
blowdown from this scale in the future, due to poor drainage, with
the extension of time scale, more product more severe, causing poor
ZuGeng, in case of small obstacles will be blocked.
The toilet shifter is used when the pit is too short or too
long.The general shift is not more than 10mm, and the floor tile
should be adhered before installation. It is recommended not to use
the shifter in very good condition, which will affect the flushing
The shifter of the toilet is a device which can change the position
of the water port under the ground when the water port under the
ground and the water outlet at the bottom of the toilet are not
suitable.The shifter can not only change the position before and
after the bottom of the water, but also change the position of the
water mouth.If can't find this small wall is apart from the toilet,
can be used shifter forward out of 5 cm, and next to the toilet is
the head of the water, such as pillars in big package, implement
too crowded or not fit, also use shifter regulation about location.
The place that the shifter commonly sells sit implement in the past
has, have adjustable and unadjustable two kinds, adjustable shifter
is live, can adjust the distance of shift, the biggest can adjust a
dozen.Implement the drainage is straight type, is the best way to
drainage, generally don't change the position of the toilet, see
some net friend changed the design of toilet implement position,
drainage pipeline under transversely laid under ground, such a
special risk, and shower laying pipes across the relationship of
the basin that wash a face also is not big, because the line is
water, arrange and implement is not only the sewage, and solid, in
case of congestion, so that across the pipeline will be difficult
to dredge.Shifter is also changed the implement straight-through
type drainage, drainage will have impact on the toilet, shift the
greater the distance, the more unfavorable to drainage
unobstructed, so it's not a necessity, try not to use shifter, if
must use, also try to shift of the minimum distance.
Install the toilet shifter to have the slope requirement, the
general shift distance is larger, the slope is also larger.So
before install shifter to stick floor tile, plane down to the
ground or mat high ground, some shifter ground mat, can be
transversely drainage place is narrow (generally the channel is
flat).But if you move only 5 centimeters, the relationship is
small, the bottom of the water is 10 centimeters, which is equal to
half of the opening.
Toilet shift note:
Toilet shift is relatively troublesome, besides use shifter, still
have mat high ground and reopen hole two methods.
But the high ground will cause inconvenience.There are no technical
problems with the re-opening of the floor, but you need to get
permission downstairs, or downstairs.
1. If you only change the pit distance, you can use the "shifter"
to change the distance of 5cm.
2. High ground shift toilet.That's where you need to move the pipe
to your toilet where it needs to be shifted, so you have to raise
the ground so you can bury it.
Switch to the "back row" toilet (now it's usually in the bottom
row).Such a displaced pipe can walk along the wall, and it is
easier to deal with the covert of the pipe without the need of high