Toilet plastic flanged screw assembly, install flange screw group,
deep blue plastic flange.
1. Determine the installation position and drill holes in the
ground.To the ground at outlet of drain pipe and the bottom of the
toilet bowl, according to the outside of the flush toilet base
size, draw the toilet on the ground points of fixed position of the
hole, and impact drill holes.The hole depth is about 5 cm.
2. Install the toilet seat.Insert the steel expansion bolt into the
ground hole, insert the bottom corner of the toilet into the
expansion bolt and tighten the nut to position the toilet.The
toilet drain is tightly connected with the ground preset drain pipe
3, install the water tank (even the toilet without this step)
according to the installation height and water tank on back wall
perforation position, the corresponding fixed position on the
metope of drilling and tapping into the steel bolts, then put the
water tank in place, make the back wall perforation sets into the
expansion bolt, add 3 mm thick nylon washer on the nut and tighten.
4. Install the connecting pipe between the tank and the toilet seat
(with copper pipe or plastic pipe, etc.), and the connecting pipe
between the inlet pipe and the bottom of the tank (with stainless
steel bellows, etc.).Inlet connection should be equipped with Angle
valve (inlet valve).
5. Install floating ball and other accessories in the tank.
6. After opening the water inlet valve, adjust the float height
according to the required water inlet height in the water tank, and
adjust the tightness of the control screw according to the water
7. After the tank is filled with water, check the toilet drain
capacity, and whether there is leakage in the connection of each
8. Seal the gap between the toilet seat and the floor with putty or
silica gel.Cement mortar or cement mortar shall not be used as
9. Install toilet seat and toilet seat.
|Name:||Install flanges in the toilet.|
|Type:||The toilet accessories|
|Product category:||The toilet accessories|
|Function:||The toilet sewage|
|Processing mode:||LOGO branded|
|Specifications:||Blue, black, light blue.(customizable)|
|Features:||Insect repellent, anti - acid, anti - odor.|
|Accessories:||Sealing wax ring, screw bag.|
Xiamen San - Tide sanitary ware co., LTD., founded in 2014, is a
company dedicated to high-end bathroom accessories development,
production and sales of enterprises, the company predecessor mold
factory, founded in 2002, mainly engaged in rubber, plastic mold
production, research and development work;In 2005, the injection
molding department was added to produce injection moulds and
various rubber products.2012 rubber production company, is
specialized in rubber and silicone products production and sales,
mainly for the sanitary ware, electronics, home appliances,
automotive, medical and other industries to provide high-quality
rubber seal products;As the business development and in order to
meet the requirement of professional market, founded in 2014 in
xiamen San - Tide sanitary ware co., LTD., professional research,
development, production and sales all kinds of high-end bathroom
accessories, the main drainage pipe, shifter, flange, cap, buttons,
install rubber gasket, bathroom screw parts such as plastic,
rubber, metal accessories.
The company persists in research and development, innovation,
quality products and services for the development of the
foundation, each year continuous development meet the market demand
of new products and provide high quality professional service to
On the basis of quality, our company locates our products with
"personality space and noble embodiment", and designs products with
fashionable and noble ideas to meet the needs of consumers.At
the same time, training a responsive, powerful sales and service
network team, at home and abroad have a high reputation and
reputation, make the brand become a nationally renowned brand!