The toilet is installed with anti-odor blue glue, and the toilet is
installed with sealing flange ring.
What is a sitting flange?
The flange ring at the bottom of the toilet (or flange ring, the
toilet seal) is a gasket made of wax and placed on the
ground.Installing a flange ring saves money and can solve the
problem of water leakage in the toilet, avoiding more damage.
Many industrial bearings to shock and abrasion between rubber mat
flange, the toilet is basic need flange installation, but a lot of
toilet is another match. Butter, polymer, the latter is more
popular.Toilet flanges (toilet seat ring) is between the drain hole
and the water hole between the toilet, it ACTS as a seal, so the
siphon toilet does not leak, the flushing effect is also very good.
1. The toilet is equipped with a good waterproof seal, high
temperature resistance, corrosion resistance, aging resistance, dry
operation, easy installation and disassembly.
2. Provide permanent leakproof sealing effect to prevent bugs,
odor, gas and acidic substances from entering.
Use 3' or 4' in the toilet.
4.100% leak proof
5. More super glue.
|Type:||The toilet accessories|
|Installation method:||Manual installation|
|Specifications:||Can be customized|
|Scope of application:||Lavatory installation|
How to install the flanged flange?
First determine the shutoff valve (the water valve or the total
water valve in the toilet).Flush the water from the tank and
pan.Drain the water tank and all the remaining water in the potty,
which can be used with a thick towel or sponge.Remove the nut cover
from the bedpan and unscrew the nut, which may require the use of
lubricating oil and pliers.Disconnect the water supply.Gently move
the toilet back and forth, loosen the wax seal and the glass.Take
care of the bedpan, not the water tank.If you hold the water tank,
you may break or break the connection between the tank and the
basin.Remove the old wax seal rings on the combined surface.Open
the new flange ring (which can be bought at the hardware store),
and turn it round and round the flange on the ground so that it is
right above the opening.Make sure two screws are in place.Lift the
toilet, cover the flange and wax seal, and keep the toilet level as
far as possible.Sit on the toilet to help seal the new flange ring
and make sure the pan stays level.Reload the nut we just
removed.Tighten the nuts with your hand to avoid cracking the
bottom of the toilet.Reconnect the water supply.Open the water
valve to fill the tank.Flush and check for leaks.If you need to
glue between the floor and the bedpan.We're done!Well, it's not
that hard, and remember to wash your hands with hand sanitizer.