Single Row Toilet Flapper Valve , One Piece Toilet Drain Valve
Model: S - 406
The overflow pipe is highly customizable.
Installation height: 120-280mm.
Water diameter: 3 "drain diameter.
Plastic flap cover, silicone seal, superior performance.
Stainless steel chain
Suitable for split toilet.
How to unload the drain valve in the toilet tank?
1. First of all, it depends on which type of toilet you are: the
conjoined body is a toilet and the water tank is not fixed with
screws, the body is a toilet and the water tank is fixed by screws.
2. If the combination is simple, open the water tank cover first
and find the screw at the bottom of the drain valve, and the
screwdriver can be removed directly.
3. If it is so divided, open the water tank cover and screw down
the two screws at the bottom of the tank, and take the water tank
down.Then you can remove the large nut of the fixed drain valve.
4. Install the above step and reverse it.
|Name:||Chain flap cover drain valve.|
|Volume:||3L/6L Dual Flush|
Packaging & Delivery
|Usage:||Plastic Toilet Water Cistern|
|Product category:||Cistern fittings|
|Material:||ABS, POM, 304 stainless steel.|
What is the reason that toilet water keeps flowing?How to solve
The toilet is a very important equipment in our toilet, it also can
have a few problems when use, the toilet is leaking is very common
one.If toilet appeared leaking condition in the home, you don't be
too nervous, should be the residence of the water cut off, and then
look for the reasons of leaking to see what was the reason for the
leakage, and then began to suit the remedy to the case, today will
give you the popular science about toilet water flows have to do,
what toilet water solution.
A drain valve, bucket of water flow has been reasons problem of
drain valve is in the hands of the toilet water tank of water,
check if the above two kinds of reasons not to come out, it should
find out the problem of drain valve, in many cases, the problems
will make the drain valve, likely because of mounting holes in the
cracks and deformation, or when installing a series of problems
such as uneven.Water tank material if the material of tank is
chosen or aging, can appear a leaking problem, now the toilet
industry progress rapidly, the toilet is very much on market, but
can't promise some fake and inferior toilet, many businesses in
order to make money, to create some others out of toilet, in order
to seek more interest, has chosen the inferior materials, the
toilet light surface is don't see why a look, they may be some
problems in the internal parts, soon will appear the phenomenon of
damage, of course, do not rule out some use for a long time in the
toilet,Its damage is a natural phenomenon of aging.Water pipe
barrels of water flow has been and is likely to be problems caused
by water pipe, water pipe is connected directly to the toilet of
water pipe, if the reasons of leaking, water pipe is the main
reason, the possibility is very large.How to solve the toilet
1, the toilet is separated from the tank, to check the parts are in
good condition, if because of some small parts damaged, can just
trim, can't take it to bought a suit, for some too bad water tank,
proposed to the water tank is changed, so as to avoid more serious
2, for the toilet drain the best solution is to check the joint of
pipes and the toilet, see if they are loose, or whether the
pipeline rotten, if because of the bad if you need to replace the
new pipes, if because there is no good, you need to use wire or
some material should be fixed can be fixed.
3, if because of the drain valve and cause of leakage is more
complex, because it involves some professional knowledge, can
special maintenance master to please, so that we can ensure the
normal use of the toilet.