Toilet plastic flanges, plastic flange screws, toilet sealing
|Name:||Rubber toilet wax ring gasket for toilet accessories.|
|Size:||Can be customized|
|Quality level:||High quality rubber flange|
|Scope of application:||toilet|
|Spare parts:||Screw fitting and sealing wax ring.|
Our Rubber toilet wax ring gasket with flange are made of Butyl
rubber ,it is of strong stciky and self adhesive material
,waterproof ,anti-microbial,it is good to seal the toilet pipes.
working life warranty 8 years.
Sitting is durable consumer goods, avoid to be greedy for fashion
and cheap, to buy those products with more quality problems.That's
the end of it.The following factors should be considered for
selecting the toilet:
First step: observe the gloss of the toilet seat.
Products with high gloss, the higher the density, the easier to
clean.This is because the quality of the porcelain is directly
related to the life of the toilet. The higher the temperature, the
better the porcelain.
Second, see if the glaze is even.
The consumer can ask the shop, discharge the mouth whether to apply
the glaze, even can reach into the drain mouth, feel back to the
water bay has glazed surface.The main culprit of the pollution is
the poor glaze, the customer can touch, the qualified glaze must be
exquisite.Consumers can be pickier, touching the glazed corner
place (Yin Yang Angle), glaze with thin, in the corner of the place
will be uneven, grinning, feels will be very rough."
The third way: toilet flushing mode.
The flush of the toilet is directly related to its flushing
mode.Now, there are two kinds of toilets in China, namely, the
direct impact and siphon.The straight flush type toilet seat USES
its own gravity to flush the water when it is flushed, and the dirt
can be squeezed out from the water pipe of the toilet to realize
the discharge. The advantage is that the pollutant discharging
capacity is strong.While using siphon implement when flush toilet
discharge pipes of siphon, sucked out dirt from implement trap and
reach the purpose of sewage, advantage is to avoid water splashing
water, cylinder body wash effect is cleaner.
Step 4: water consumption of the toilet seat.
There are two kinds of water-saving methods, which are water-saving
and water-saving.Water-saving toilet like ordinary toilet function,
must be both save water, maintain clean and transportation of
waste, the current market with a water-saving slogan but product
technology and the actual effect is not satisfied products, not
when the choose and buy must especially pay attention to.
Installation method of sitting flange:
1. Close the water valve.Remove the inlet pipe.
2. Clean up and remove the toilet.Flush the pipe with water and
pour a few buckets of water into the pipe.
Clean up the garbage and put the toilet away.
4. Apply the glass glue to the original mark and apply it to the
mouth of the drain pipe.
5. Put the flanges on the toilet drain, connect the water inlet,
and put the toilet seat on top of the glass.
6. After 24 hours, open the water inlet switch.